Category Archives: Roofing


Roofing is a vital element of every construction, whether for an industrial or domestic purpose. Suitable roofing not only gives a beautiful finish to a building but also plays a major role in regulating the building temperature. Therefore, selecting the ideal material for roofing is an important task.

Factors to consider when selecting ideal roofing system:

  • Climate

roofersThe climate of your area will determine the amount of insulation needed for your roof. Primarily hot locations will benefit from a reflective roofing system. Conversely, your roof will require more insulation if located in a cold area. If a large temperature spread exists, then you should choose a roofing system that will expand and contract with temperature change.

  • Codes

It is crucial to research on your area’s regulations when selecting your next roofing system. These include the building, energy and fire regulations. Research if your area has any laws regarding the aesthetics of your roofing system. Local laws may affect how and when your roof can be installed. (i.e. working hours and noise reduction).

  • Characteristics of the Building

The features of your building will have a tremendous influence on your roofing choice. Important points to consider include the building height, access to the roof, type and slope of the floor, quantity of equipment on the roof and others. If a crane cannot be used on the site, your choice of a roofing system will be restricted to what can be hand carried.

  • Construction Costs

Before you install a new roofing system, you need to come up with a budget. Having an adequate, agreed-upon budget for the roof ensures that all parties involved are in agreement avoiding any arguments that may come along.

  • Credible Contractors

Finally, keep in mind that quality roofing Sandy Springs is not possible without reliable roofers  who can install it. Be sure to research the credentials of potential roofers. Also, it may be a good idea to select local roofers as they can respond more quickly to urgent problems than roofers located far from the job site.

Functions of roofers:

  1. Monitor the flow of the project and keep the clients informed of the various details such as work schedules.
  2. Examine the quality of the work regularly and assure that it is up to the high company standards.
  3. Ensure that roofing is performed in a systematic and neat fashion.
  4. Examine and analyze the present condition of the roof and take note of the areas that require attention when replacing roofs.
  5. Ensure that roofing projects are performed within the scheduled time meeting clients needs.
  6. They recommend suitable roofing designs and materials that will serve efficiently enhancing the building appearance.

Factors to consider before hiring a roofer:

  • Inquire about the insurance

Roofing is a risky task associated with significant workplace uncertainties. Thus, roof-repairsappointing an authorized roofer with recommended insurance is important which guarantees that you will not be accountable due to workplace hazards.

  • Accreditation of the contractor

One can only be sure of tracing a roofing company if it is a licensed and registered entity. On occasions of dissatisfaction regarding the quality of work, you can easily track a credited roofer who can therefore compensate.

  • Certification of products used

Certifications confirm that high-quality roofing materials are adopted by the roofer thereby verifying that clients get original products worth their money.

  • Building permit

Since some areas impose restrictions on several types of roofing solutions, it is recommended to check whether the roofer you engage is registered which simplifies the process of seeking permission where such restrictions are applied.

In conclusion, it is true that customers can save on labor costs by installing their roof by themselves.However, they must reflect on the quality of the job that they can perform and the period required to complete the job. Considering using certified roofers is more recommendable since installing roofs is done according to industry standards and building codes.

Roofing Repairs

Leaking roofs can be very frustrating to any home owner. Dealing with stained ceilings and floors are just a few of those frustrations. The good news, however, is that repairing rooftops can take a couple of minutes to repair, and they do not necessarily need a professional like . This article will cover the steps you need to take to repair different types of rooftops.

Identify the leaking point.

Be sure that your drainage system is not the cause of your stained ceiling. This is easily done determining when your roof is leaking. If it only leaks during the rainy days, then you have to make an appointment to climb your rooftop. If not, examine your piping systems and repair them appropriately.

Identify damaged part of the roof.

Locate the damaged area of the roof by tracing back the stained or leaking part of the ceiling. Rarely is the damaged area of the roof located directly above the ceiling. Therefore, look for higher grounds for a broken, curled and missing shingles and shakes or blisters.

Repairing shingles

l You may want to replace a broken or missing shingle. Curled shingles however can be straightened out using a blow drier. Do not expose to direct heat as it is flammable.

l Use a putty knife to scrape off any cement on the roof.

l Place the shingle and apply asphalt roof cement on the edges. Make sure that all the edges are sealed.

l Drive in galvanized roofing nails on each upper corner and cover the nails with cement.

Repairing Flat roofs

l To identify leaks, look out for cracks or blisters on the roofing material

l Carefully cut a line in the middle of the blister without damaging the substrate under it.

l Lift the blister and cleanout any soaked water by placing a rag to soak it.

l Spread roofing cement on the felt and press the blister down firmly

l Use galvanized roofing nails to close the blister permanently by driving them on each side of the slit

l Apply cement over the nails and the whole blister


Repairing Wooden Shake Roofs

l Identify the damaged shake and use a hammer and chisel to split it. Remove any pieces that may have been left.

l Take the measurements of the damaged wooden shake and cutout another new one. Remember to cut a smaller shake by around 3 inches because it expands by that the first time it rains.

l Using galvanized roofing nails, hammer the new shake into place.

Repairing Roof Connections

Sometimes your roof may be in perfect condition but the roof connections have worn out. This is mostly identified by soaked walls. Repairing this area simply requires you to chip off the old cement using a chisel and reapplying cement and leaving it to dry. Click here to contact us.




Repairing your own roof is the only way to do it. Honestly, most roof repairs can be done yourself. With the help from the Internet, you too can easily repair a simple roof without being dependent on professional roofing contractors. Also, calling a professional roofing company to fix a simple leaking roof could end up being quite costly. However, hiring a professional roofing contractor does have its advantages. For instance, do you think you will be able to handle the job if it turns out to be much larger than what you first thought? Professionals are better placed to do this.

Before you start work on the roof, take these important steps. Check the weather. Never attempt a roof repair in the rain, unless the emergency cannot be ignored.

You never want to leave the bare wood exposed to the elements outside. In fact, as soon as you tear away any shingles, it’s recommended to immediately cover with tar/felt paper and secure it in place. Never walk on a wet, bare wood roof because it can be extremely slippery.

A roof can be slick regardless of whether it is wet or not. A roofing contractor usually brings a push broom to sweep down a roof before they start working on it. Roofing repair professionals are keen on safety precautions. You should too.

Wearing work boots while walking a roof also is dangerous. The bottom soles of work boots are hard and don’t grip the roof like a good pair of running shoes. Running shoes have the rubber soles that make walking a roof a lot safer. Running shoes enable you to somewhat grip the roof better than a work boot. There are, however, a few roofing contractors that do not agree with this.

When handling shingles of roofs, be careful to do so with gloved hands as they could badly injure your much needed hands. Shingles, especially those made of Asphalt are like sandpaper and it won’t be long until they turn sore.

Never try to do a big roof job on your own. You should always have a friend around; make that person your “man on the ground”. In case if an emergency, he is the best placed person to make sure you are provided with medical attention.

Contact here